VWT Series

Calculations for this model are made in tons of cooling - as it is preferable to use this category of cooling towers with chiller cooling applications, water chiller type - water cooling, as well as some medium industrial applications.
The cooling capabilities of this category start from:
20 refrigeration tons/70 kW to 1300 refrigeration tons/4550 kW

• High efficiency, save energy to the largest extent
• Fit with various environment changes in different industries
• Matched equipment running normally
• Completely comply with national standards
• Fixed pipe with nozzle distribution
• Three layers infill
• High efficiency drift eliminator

  The most difficult engineering process in the field of HVAC-R refrigeration and air conditioning at all is performing thermal load calculations - the displacement of a heat load with the option of a cooling tower, as it is a machine that operates regularly without cooling media such as compressor and Freon gas - and it must perform a very arduous cooling process depending on the accuracy of the design, the quality of the components and its reputation. the creator.
  Therefore, we strongly recommend that the capacity of cooling towers be determined only by a well-known manufacturer with high experience and Approved certificates.

  We are experts in the field of cooling towers and have implemented more than 300 medium and large projects, and we have the experience, capacity and resources necessary to achieve more successes.

  
  Components Instruction

  CASING AND WATER BASIN

  Fiberglass reinforced polyester (FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.

  FAN & DRIVING SYSTEM

  All cooling tower fans with adjustable pitch blades are applied to being balanced, it operates stably and quietly. Material chosen are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for option.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.    

  WATER DISTRIBUTION

  Using high coefficient rotating sprinkler head made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance. 

  FILL PACKING

  Used high quality & improved performance PVC with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.

  FRAME

  The framework is made of hot dip galvanized steel (HDGS), to makes the cooling tower in rust-free, durable and long service life.
   

  Optional Accessories

  ♦ Noise reduction upgrade                    

   ♦ Anti-Freeze heater
  ♦ Vibration isolator & rubber mat             ♦ Stainless steel framework / bolts and nuts (304 / 316)
  ♦ High-temperature upgrade             

   ♦ Dual-speed Motor & VFD motorAnti-Freeze heater

   

  VWT Series 

  The VOLGA Saudi Cooling Tower FRP (Bottle shape) Cooling Tower consists of Honeycomb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses'. Uniform distribution of hot water by rotating arm sprinkler.

  Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.