VWT Series Open Circuit Cooling Tower
VOLGA - HVAC, FRP Round Cooling Tower
VWT Series
♦ High efficiency, save energy to the largest extent |
|
Components Instruction
CASING AND WATER BASIN
Fiberglass reinforced polyester (FRP) is applied with water-resistance resin and high quality fiberglass mat. With good moisture, high gel,high strength, spray the gel-coat on FRP parts by machine and is thermal formed.
FAN & DRIVING SYSTEM
All cooling tower fans with adjustable pitch blades are applied to being balanced, it operates stably and quietly. Material chosen are A.B.S, aluminum alloy for normal standard, F.R.P or stainless steel material available for option.Small capacity cooling tower adopts direct drive low noise fan. Bigger capacity fan equipped with Belt drive speed reducer or Gear box.
WATER DISTRIBUTION
Using high coefficient rotating sprinkler head made of plastic or aluminum alloy could reduce the pressure of friction loss, and the water can be distributed evenly to achieve the max thermal cooling performance.
FILL PACKING
Used high quality & improved performance PVC with good material, it is high cooling efficiency and anti-corrosive & UL V-0. The surface of infill is corrugated to increase the filling pitch to make sure that infill is clog-free and overcome the problem of water quality. Special material for option if high entering water temperature.
FRAME
The framework is made of hot dip galvanized steel (HDGS), to makes the cooling tower in rust-free, durable and long service life.
Optional Accessories
♦ Noise reduction upgrade
♦ Anti-Freeze heater
♦ Vibration isolator & rubber mat ♦ Stainless steel framework / bolts and nuts (304 / 316)
♦ High-temperature upgrade
♦ Dual-speed Motor & VFD motorAnti-Freeze heater
VWT Series
The VOLGA Saudi Cooling Tower FRP (Bottle shape) Cooling Tower consists of Honeycomb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses'. Uniform distribution of hot water by rotating arm sprinkler.
Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption.
Specifications of Bottle Shape FRP Cooling Tower
- The Ranges are from 10 TR to 10000 TR.
- Send your requirement to get our best free quote
1. Water flow rate,
2. Hot water Inlet temperature,
3. Required cold water Outlet
4. temperature and
5. Wetbulb temperature.
Saudi Arabia Cooling Tower
Open Circuit Saudi Arabia Cooling Tower
Open Circuit Cooling Tower Series VWT |
DESIGN CONDITION
A)- Entrance temp. t1=37°C B)- Wet bulb temp. tWB=28°C
C)- Leaving temp. t2= 32°C D)- Dry bulb temp. tDB=31.5°C
F)- Atmospheric pressure=99.4 KPa
VOLGA Open Circuit VWT Series Cooling TwoerThe Technical Specification of VOLGA-HVAC (VWT Series) Cooling Towers |